|
Turns on or off the "Up" air solenoid for raising the load/unload table. Note
that the "Down" air solenoid must be off before the table can be raised. When
both the "Up" and "Down" solenoids are off, the table is idle and will move
freely up or down.
CAUTION: Do not turn this on when the plate door is closed and the table is
down, or when the table is down and the "Down" solenoid is not on. The table
air cylinder MUST be pressurized is the opposite direction you want to move it,
or else the table will slam into place.
|