Long Name:

Applies to:

Description:

Disables optical plate sensor inside conveyer used to detect when plate has arrived in conveyer and when plate has left conveyer.

• npc = 0 enables checking of sensor.
• npc = 1 disables checking of sensor.

Type:

Default:

• 0

Range:

• 0 to 1

Notes:

When the sensors are disabled (npc=1) then the firmware defaults to delay of (eject_timeout) milliseconds before it assumes the cylinder moved as directed. When enabled (npc=0) the same amount of time is allowed for the appropriate sensor to be detected before a timeout error is generated.

Partition:

See Also: