Long Name:

Applies to:

Description:

Disables checking of the trailing edge lock sensor. This sensor is used to ensure that the magnets are locked or unlocked before raising or lowering the TEC Backbone.

• ntl = 0 enables checking of sensor.
• ntl = 1 disables checking of sensor.

Type:

Default:

• 0

Range:

• 0 to 1

Notes:

When the sensors are disabled (ntl=1) then the firmware defaults to delay of (te_ulock_delay) milliseconds before it assumes the cylinder moved as directed. When enabled (ntl=0) the same amount of time is allowed for the appropriate sensor to be detected before a timeout error is generated.

Partition:

See Also: