Long Name:

Applies to:

Description:

Disables optical plate sensor on the unload table. There are two sensors on one board, the upper one is known as the unload_queued sensor and the lower one is known as the unloading_plate sensor. Both feed into the LUE board.

• nups = 0 enables checking of both sensors.
• nups = 1 disables checking of both sensors.

Type:

Default:

• 0

Range:

• 0 to 1

Notes:

When unloading a plate from the drum, the firmware allows (sensor_delay) milliseconds for leading edge of the plate to get between sensors , that is unloading_plate covered and unload_queued not covered, if nups=0 (enabled). If nups=1 then no checking is done.

Partition:

See Also: