Long Name:

Applies to:

Description:

This parameter enables [1] or disables [0] the leading edge clamp (LEC) sensor. In the VLF Trendsetter the LEC is a swinging section of the trailing edge clamp (TEC) that allows the TEC to double as both a TEC and LEC.

Type:

Default:

• 1

Range:

• 0 to 1

Notes:

When any sensor is disabled the firmware assumes the associated device is in the correct state after a specific timeout period has elapsed. Sensors are sometimes disabled to bypass them on a temporary basis if they fail and can not be conveniently repaired. Sensors should only be disabled after carefully considering the potential impact on both machine and operator.

Partition:

See Also: