|
Sets the number of rotations that must be imaged at the end of skipping a blank
region before the non-zero image data is plotted. This give the focus some time
to re-learn the focus data after it has quickly skipped to a different region on
the drum.
The current 1.0, 1.7x, and TFX heads require at least two drum rotations to
re-learn the focus data. If focus-related artifacts are appearing within the
first few swaths after skipping a blank region and slowly fade away, then try
increasing this parameter to the number of swaths in which artifacts are seen.
Don't set this any lower than the default of 2 swaths for now. There would be
very little performance gain by doing so, and a smaller value puts the image
quality at risk.
|