Long Name:

Applies to:

Description:

The thermal head firmware monitors the humidity using a sensor mounted within the thermal head. If the humidity exceeds the configured threshold, then the thermal head is shutdown. Any plot in progress is aborted.

If this parameter is set to zero, then the humidity sensor is ignored by the thermal head firmware. This value should never be set to zero on any head in the field since water condensation on the laser will cause laser failure.

Type:

Default:

• 30.000

Range:

• 0.000 to 60.000 [%]

Notes:

Applies to Thermal Head firmware version 1.30 and above

Partition:

See Also: