Long Name:

Applies to:

Description:

This is the level that the firmware uses to determine whether there is a plate covering the picker sucction cups. Used in some cases to determine if there is a plate on the picker. (Proximity sensor is primary sensor for determining if plate on picker or plate box empty.)

The threshold should be set to the 2/3 point between the No_plate_on_picker vacuum value and the plate_on_picker vacuum value, and no higher than 5 below the plate_on_Picker value.

Higher value implies higher vacuum.

Type:

Default:

• 60

Range:

• 0 to 255

Notes:

Partition:

See Also: