act tec Turns on or off the air solenoid for the trailing edge (TE) clamp actuator bar. "On" will retract the actuator bar towards the drum and "off" will extend it away from the drum. This command is identical on all CTP machines with the exception of the VLF Trendsetter, where the leading edge (LE) clamp actuator bar is combined onto the TE actuator bar. In that case, this command will also raise or lower the LE clamp actuator depending on whether or not the hinged LE actuator is extended down. WARNING: Do not turn this on while the drum is turning! Trendsetter_VLF act tec on|off

../commands/act_drlr.xmlCommand: act drlr

../commands/act_tecul.xmlCommand: act tecul

../commands/act_lecext.xmlCommand: act lecext

../commands/act_lecret.xmlCommand: act lecret

../commands/tec.xmlCommand: tec

../commands/lec.xmlCommand: lec

../commands/rlr.xmlCommand: rlr

..\..\ShowAllErrors.htmFirmware 0 Error Index ..\..\ShowAllCommands.htmFirmware 0 Command Index ..\..\ShowAllNVS.htmFirmware 0 NVS Index Updated: Wed Jul 16 19:38:44 2008 PST