plot headtest [ < mainscan > ] This command puts the machine into head test mode. In this mode, the drum is spinning and the PLL is enabled, and the gating signals to the head are configured. The SCLK signal can be configured by using the MODE command to select a desired mainscan resolution. Use the MEDIA command to select the desired media parameters, including drum speed. An optional parameter specifies the mainscan image size to configure the head gating signal for. The default is the maximum image size that will fit on the loaded media. The gating signals are also affected by global plot shifts, set using the PLOT SHIFT command. The PLOT STOP command must be used to end PLOT HEADTEST. Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 This command is available. Expert 11-Jun-2001

../commands/mode.xmlCommand: mode

../commands/media.xmlCommand: media

..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:25:17 2008 PST