plot shift < subscan > [ < mainscan > ] This command can be used to position the image on the media, relative to the detected edge and the leading-edge clamp margin. The optional subscan parameter specifies the number of millimetres to offset the image from the left edge of the plate. The optional mainscan parameter specifies the number of millimetres to offset the image from the leading-edge clamp margin. The new shift parameters take effect on the next test plot. They also apply to subsequent workstation plots. Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 There are no limits on the plot shifts. However, the plot will fail if the plot is shifted entirely off the plate. A negative shift can be specified. This command is available. Field 11-Jun-2001 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:25:17 2008 PST