preloader This command displays the current preloader status. There are four status bits available from the preloader: Powered On: the preloader is turned on In Place: the preloader is in place in front of the Trendsetter Fault: the preloader is faulted (operator must check preloader for details of fault) Loading: the preloader is loading a plate into the Trendsetter bay There are also three outputs from the Trendsetter: Fault: the Trendsetter is in a faulted state (error lights flashing) Picker clear: the picker is down so the preloader can load a plate Request plate: the Trendsetter is requesting a plate from the preloader This command will return an error if the Preloader option is not enabled. Trendsetter_400/800 Trendsetter_400/800_ContinuousLoad Trendsetter_400/800_Autoloader Trendsetter_NEWS preloader preloader test requestplate <enable|disable> preloader test pickerclear <enable|disable> preloader test docked <enable|disable> This command is available. Field 02-Aug-2002 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:25:18 2008 PST