33602 Non-Volatile Storage STG: Storage medium is corrupt Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF SAT_SNIF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 The non-volatile storage medium (Flash or Battery-backed SRAM) is corrupt. This error occurs when corrupted data in Nvs causes the storage subsystem to fail, since it relies on the integrity of the data in Nvs in order to find, read and write storage keys. Run the "stg verify" command to attempt to recover from Nvs corruption. Then reboot. If this does not solve the problem, then record the error number and report it, along with a short description of the operation which caused the error to occur (if possible), to Creo Service. This error is reported. A power failure may have occurred during a Nvs write operation. A failed write operation results in an incomplete storage key existing in Nvs. Since Nvs now contains an invalid entry, the storage subsystem can no longer reliably access the Nvs, and is considered corrupt. The Nvs device itself is damaged, or there is some other hardware problem. Although highly unlikely to occur, a physical defect or hardware problem will also cause this error. 08-JAN-2001 Added detail. ../commands/stg_verify_flash.xmlCommand: stg verify flash ../commands/stg_verify_ram.xmlCommand: stg verify ram ../commands/stg_verify_temp.xmlCommand: stg verify temp ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:22:59 2008 PST