40409 Media Handler MDH: Cannot move picker <Direction> because <Obstruction> Trendsetter_400/800 Trendsetter_400/800_Autoloader Trendsetter_NEWS Trendsetter_Series_4 This error is reported when the picker is attempting to move but the firmware detects that something is in the way to prevent that movement. Possible cases are: Picker not allowed to move up or down unless it is Out. Picker not allowed to move in or out unless the separator arms are Out. Picker not allowed to move out if picker wrist is not out. Picker wrist is not allowed to move in if picker is not in. The sensor status may be checked by using the <<picker>> command. Select the RESUME button on the workstation dialog box. If this fails to correct the problem, open the plate cover and inspect the plate separator arms and the picker head. The picker should be in the OUT position (i.e. AWAY from the plate stack). The plate separator arms should be in the outboard position and should be activating their microswitches. If everything looks normal, then the Response Center should be called. This error is reported. Picker may have been moved in towards the plate stack through diagnostics. Separator arms may have been moved in through diagnostics. Faulty picker sensor(s). Faulty separator sensor. Direction - The direction the picker wanted to move. Obstruction - This is what is causing the picker to not be able to move. 05-MAR-2002 Created. ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:26 2008 PST