40816 Media Handler MDH: The processor is still busy with the previous plate, so is unable to accept another Magnus_VLF Trendsetter_400/800 Trendsetter_400/800_ContinuousLoad Trendsetter_400/800_Autoloader Trendsetter_NEWS Trendsetter_Series_4 During the unload sequence, just prior to the device pushing the plate into the processor, the processor status is checked. If the processor status indicates that it is still busy, the device waits a while, then reports this error. The busy signal is normally asserted when there is a plate in the processor. It is de-asserted once the processor can accept another plate. Check the processor to see if the previous plate exited the processor successfully. This error is reported. The processor interface is enabled and the processor "busy" signal is asserted, and has been for some time. 27-Jul-2002 ../commands/option_processorinterface.xmlCommand: option processorinterface ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:31 2008 PST