44996 Exposure Head Interface EHI: Stroke Clock or Imaging signal fault, check LC-BP cable Gravure Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 One or both of the stroke clock or IMAGING signals are not present. Without these signals, the head is unable to image properly. This error code applies to Thermal Head firmware version 1.91 and newer. Replace the DB9 connector cable to the head. If this doesn't work, call service. This error is reported. The LVD board requires the STROKE CLOCK and IMAGING signal from the host. These signals are in the DB9 connector between the host and the head. If one or both of these signals is not detected, this error will be generated. 10-Mar-2003 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:43 2008 PST