45234 Product Support PRD: Warning: System Pressure Low Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 This error indicates that the system pressure is getting low. It is only a warning and the device will continue to operate. It is not a fault condition, but it does indicate that the system air pressure has gone below the warning threshold and is getting close to the fault threshold. Check the air hose connected to the machine and ensure that it has sufficient air pressure. Check the system pressure gauge on the machine to see the pressure reading. Adjust external air supply if necessary. Check the system air pressure measured by the device, as well as the fault and warning thresholds by issuing the "system" command. This error is reported. The system pressure has dropped below the warning level The system pressure threshold parameter ("prd systhresh") is not set properly for this machine. The warning threshold is a fixed level (5 psi) above the fault threshold. Changing the system pressure fault threshold ("prd systhresh") will also change the warning threshold. 05-Nov-2004 Created. ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:45 2008 PST