45236 Product Support PRD: Head Input Fault: <Input bit description> (<Input bit name>) In Unexpected State Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 The air pressure to the head has dropped below the acceptable threshold. When this happens, the head must be shut down to avoid the possibility of damaging the focus servo subsystem. Check the air hose connected to the machine and ensure that it has sufficient air pressure. Check the air hose connected to the head. Check the system pressure gauge on the machine to see the pressure reading. Adjust external air supply if necessary. This error is reported. The head air pressure has dropped below the acceptable level Input bit description. - A description of the input bit. Input bit name. - The text name for the input bit. 19-Nov-2004 Created. ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:45 2008 PST