EHI head foffset Gravure Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 Specifies the target lens position. When fmode is set to 0,2,3,4 or 6 the autofocus servo uses the output signal from the optical distance sensor to generate the necessary feedback for the lens positioning control loop. The value of foffset is subtracted from the output of the optical distance sensor to generate the focus error signal. This parameter has no effect when fmode is set to 1. Added to the foffset to form the total foffset is three times the "media sd" value. This value is used to adjust for the head dependent difference between write laser focus and autofocus distance sensor zero point. The head dependent part belongs in foffset but media dependent part should go into the "media sd" setting. This parameter is available.

Please issue the appropriate monitor command to determine this parameter's default value.

Please issue the appropriate monitor command to determine this parameter's minimum and maximum values.

07-May-2002 Normal

../prm/ehi_head_lpkd.xmlPRM: head lpkd

../prm/ehi_hdm_fmode.xmlPRM: hdm fmode

..\..\ShowAllErrors.htmFirmware 1 Error Index

..\..\ShowAllCommands.htmFirmware 1 Command Index

..\..\ShowAllParameters.htmFirmware 1 Parameter Index

Updated: Thu Jul 17 07:23:57 2008 PST