EHI head humidity Gravure Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 The thermal head firmware monitors the humidity using a sensor mounted within the thermal head. If the humidity exceeds the configured threshold, then the thermal head is shutdown. Any plot in progress is aborted. If this parameter is set to zero, then the humidity sensor is ignored by the thermal head firmware. This value should never be set to zero on any head in the field since water condensation on the laser will cause laser failure. This parameter is available.

Please issue the appropriate monitor command to determine this parameter's default value.

Please issue the appropriate monitor command to determine this parameter's minimum and maximum values.

07-May-2002 Applies to Thermal Head firmware version 1.30 and above Normal

..\..\ShowAllErrors.htmFirmware 1 Error Index

..\..\ShowAllCommands.htmFirmware 1 Command Index

..\..\ShowAllParameters.htmFirmware 1 Parameter Index

Updated: Thu Jul 17 07:23:57 2008 PST