Print Console 2.1.1bld24 Patch 1 
Date: 16 January 2002
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Overview:

This patch is designed for systems running Print Console 2.1.1 build24 

This patch fixes these two problems:

1. Illegal characters in file name cause error messages in Print Console
Print Console hangs with the Waiting for Image Parameters or Waiting for SCSI data 
error message when the file name included % followed by the one of the following characters:
% 1 2 3 4 5 6 7 8 9 0 c C d i o u x X e E f g G n p s S 

2. Imaging artifact appears when imaging TIFF files after resetting the output device
After resetting the output device, imaging a TIFF file via TIFF Downloader produced 
jumbled data for the first 1-2 cm of width along the home edge of the plate. This is now fixed.


To initiate the patch, launch the setup.bat file from the patch1 folder

Launching the setup.bat file from the patch1 folder, on succesful completion 
will do the following:
Create a backup folder on the selected drive
Copy the current tiffdownloader.exe into this folder
Copy the new Tiffdownloader.exe into the printConsole\bin folder of the selected drive
crete a log file in the PrintConsole\bin directory

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Installation procedure:

	1. Close any running applications (especially Print Console).

	2. Note the drive (i.e. the mapped drive letter) where the Print 
	   Console software was previously installed.

	3. Double-click the setup file (setup.bat) and 
	   follow the on-screen prompts:

		a. To proceed with installing the patch, press "y".
		b. Enter the target drive letter (just the drive letter, no 
		   colon).
		c. Confirm your choice by pressing "y" (or press "n" to cancel).

	 
	The batch routine will do the following: 
	Create a folder Backup "Backup_PC2_1_1_patch1"  on the selected drive
	Copy the current Tiffdownloader.exe into the Backup_PC2_1_1_patch1 folder
	Copy the new Tiffdownloader.exe into the PrintConsole\bin folder of the selected drive
	create a log file "PC2_1_1_patch1.log" in the PrintConsole\bin folder

	
	5. Press any key to continue.

	6. Check the log files for any errors

	
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
