|
|
|
|
Configure the redirection mode to "Enable", "Pass" or "Disable". During development, production and integration, the exposure head implements an exposure head serial port as a diagnostic port. However, once an exposure head is complete, the exposure head's serial port is not accessible. Redirection allows access to the diagnostic port using the host's serial port as a diagnostic port.
|
|
| The "Enable" redirection control mode provides the exposure head exclusive access to a serial port provided by the host. The exposure head uses the host's serial port as a diagnostic port. To the exposure head, the "Enable" and "Pass" redirection modes are identical.
|
|
| The "Pass" redirection control mode provides the exposure head shared access to a serial port provided by the host. The exposure head uses the host's serial port as a diagnostic port. To the exposure head, the "Enable" and "Pass" redirection modes are identical.
|
|
| The "Disable" redirection control mode does not provide the exposure head access to a serial port provided by the host. The exposure head must use an exposure head serial port as a diagnostic port.
|
|
| Note that the exposure head does not modify the redirection mode. The exposure head notifies the host of the redirection event. The host configures the redirection mode.
|
Thermal 1.0 / 1.7x equivalents:
|
|
|
- The monitor command redirect (enable|pass|disable) does not have an equivalent.
|
ERRORCODE: [05000] The redirection mode is invalid
|