|
|
|
|
The host configures the write laser control mode by sending a command to the exposure head. Typically the exposure head will attempt to configure the write laser control mode and return an error code indicating success or failure. This error indicates that the an error has occured configuring the write laser control mode that the exposure head is not prepared to handle. This error is only returned as a "last resort".
|
|
| Note that this command only applies to the Thermal 1.0 / 1.7x compatible build of the exposure heads.
|
Call Service.
|
- Firmware error that will occur during firmware development and testing.
|
ERRORCODE: [04907] Timeout waiting for the focus
|
|
|
ERRORCODE: [04908] Timeout waiting for the stroke calibration
|