Graphs | Data | Data Interpretation
PlotOmnibus is a script that allows you to do a power series, a curve series, a beam position series, an offset series or a slope series. Using a dialog box, you can choose to enter a firmware command, do a plot, or quit. The type of plot is chosen with a pull down menu at the top of the dialog box. The following are the other entries in the dialog box, along with the defaults:
| Plot type | WPower | BMCurve | BMSlope | Foffset | BPosn |
| Media | 1 | 1 | 1 | Media Independent | Head NVS |
| Range Start | 6 | -10 | -10 | -120 | -2500 |
| Range End | 8 | 10 | 10 | 120 | 2500 |
| Range Increment | 0.2 | 2 | 2 | 20 | 500 |
| SSSA (thou) | 500 | 500 | 500 | 500 | 500 |
| Swath width (thou) | 1000 | 1000 | 1000 | 500 | 1000 |
| Swath gap (thou) | 100 | 100 | 100 | 100 | 100 |
| Mainscan image size (pixels) | 19200 | 19200 | 19200 | 19200 | 19200 |
| MSSA (thou) | 600 | 600 | 600 | 600 | 600 |
| Plot #1 type | 12 (solid) | 12 (solid) | 12 (solid) | 12 (solid) | 12 (solid) |
| Plot #2 on | Yes | No | No | No | No |
| Plot #2 type | 50 (50% screen) | N/A | N/A | N/A | N/A |
| BB: 1st only | No | No | No | No | No |
This script produces no graphs.
This script produces no data.
Please see the media setup documentation to interpret the resulting plot.