When to use this script | Instructions
TH2ver.spt is used to check the versions of the various include files needed for TH2 script operation. The script also lists some of the configuration settings for your installation. You do not have to be connected to a device to run this script. This script is supplied by the Thermal II group.
Anytime you want to check versions or if you are having troubles and think you might have an incorrect version of some include file.
Just run the script. Note that if the script crashs, then you have a very old install. An example output is below
Pass: Splot version: At least 3.950 needed. Version is 3.950
Pass: pm_include.spt version: At least 6.015 needed. Version is 6.015
Pass: stdtii_include.spt version: At least 6.800 needed. Version is 6.800
Pass: tii.spt version: At least 7.037 needed. Version is 7.037
Pass: tii_bbsprofile_include.spt version: At least 1.003 needed. Version is 1.003
Pass: tii_BG_include.spt version: At least 6.000 needed. Version is 6.000
Pass: tii_config_include.spt version: At least 8.016 needed. Version is 8.016
Pass: tii_config_include: TII_MINIMUM_SPLOT_VERSION should be at least 3.950. Now, it's: 3.950
Pass: tii_creep_include.spt version: At least 1.012 needed. Version is 1.012
Pass: tii_db.spt version: At least 2.007 needed. Version is 2.007
Pass: tii_foc_io.spt version: At least 6.206 needed. Version is 6.206
Pass: tii_foc_ping.spt version: At least 1.010 needed. Version is 1.010
Pass: tii_FocLog.spt version: At least 2.108 needed. Version is 2.108
Pass: tii_graph_include.spt version: At least 7.027 needed. Version is 7.027
Pass: tii_io_mpe.spt version: At least 6.000 needed. Version is 6.000
Pass: tii_io_primatives.spt version: At least 6.410 needed. Version is 6.410
Pass: tii_nvs_io.spt version: At least 6.311 needed. Version is 6.311
Pass: tii_port_include.spt version: At least 1.007 needed. Version is 1.007
Pass: tii_prm_include.spt version: At least 7.016 needed. Version is 7.016
Pass: tii_settingfile.spt version: At least 1.002 needed. Version is 1.002
Pass: tii_special_io.spt version: At least 6.725 needed. Version is 6.725
Info: LocalJig_include.spt: Serial port - use current settings on the remote machine
Info: LocalJig_Include.spt: This is a field configuration.
Info: LocalJig_include.spt: Save graph type is PNG (portable network graphics)
Info: LocalJig_include.spt: Use port switching for head redirection (at factory only)