|
|
|
|
| voltage
| The piezo voltage from 0.0 to 100.0 volts.
|
Set / display the piezo voltage.
|
|
| When setting the piezo voltage, the actual piezo voltage is filtered to prevent current limiting of the piezo driver. Note that if the beam-pointing control mode is "On", the piezo voltage will be overwritten by the beam-pointing control loop.
|
|
| When displaying the piezo voltage, display the piezo voltage as follows:
|
|
| BPD: Piezo Voltage = <Voltage>
|
Thermal 1.0 / 1.7x equivalents:
|
|
|
- The monitor command bpd drive [(dual|a|b) <voltage>] does not have an equivalent.
|
|
| Thermal 2 equivalents:
|
|
|
- The monitor command bpd drive [(dual|a|b) <voltage>] does not have an equivalent.
|