|
|
|
|
Displays logic analyzer information as follows:
|
|
| LGA: Control Mode=<Control Mode>
|
|
| LGA: Control State=<Control State>
|
|
| LGA: Data Width=<Data Width>
|
|
| LGA: Probe Width=<Probe Width>
|
|
| LGA: Holdoff Width=<Holdoff Width>
|
|
| LGA: Address Width=<Address Width>
|
|
| The logic analyzer control mode is set by the monitor command lga mode (lvdu|lvdl) (enable|disable). The logic analyzer control mode will be one of the following:
|
|
|
|
|
| The logic analyzer control status is determined by the logic analyzer control mode and the current state of the logic analyzer. The logic analyzer control status will be one of the following:
|
|
|
|
|
| The data width, the probe width, the holdoff width and the address width are determined from the hardware configuration.
|
Thermal 1.0 / 1.7x equivalents:
|
|
|
- The monitor command lga info (lvdu|lvdl) does not have an equivalent.
|
|
| Thermal 2 equivalents:
|
|
|
- The monitor command lga info (lvdu|lvdl) does not have an equivalent.
|