|
|
|
|
| pattern
| The TPG pattern from 0 to 65535.
|
Configure the source for the image timing and the source for the image data for the "Image" plot control mode. The source of the image timing will be the gigabit fiber interface, the RS-422 connector or the internal engine synthesizer. The source of the image data will be either the gigabit fiber interface or the test pattern generator.
|
|
| The gigabit fiber interface is the default source for both the image timing and the image data. The gigabit fiber interface will be the interface used in the field.
|
|
| The RS-422 interface will augment development and testing of the exposure head by allowing MPE and MCE based machines to be used as a source for the image timing. The RS-422 interface is not expected to be used in the field.
|
|
| The engine synthesizer will augment development and testing of the exposure head by implementing an internal source for the imaging timing. The test pattern generator will augment development and testing of the exposure head by implementing an internal source for the image data.
|
|
| The configuration can be updated as required but only takes affect for the "Image" plot control mode. Note that the configuration will not be updated if a plot is already in progress.
|
Thermal 1.0 / 1.7x equivalents:
|
|
|
- The monitor command plt image (fiber|rs422|synthesizer) (fiber|tpg [<pattern>]) does not have an equivalent.
|
|
| Thermal 2 equivalents:
|
|
|
- The monitor command plt image (fiber|rs422|synthesizer) (fiber|tpg [<pattern>]) does not have an equivalent.
|
COMMAND: plt mode (image|off)
|
|
|
COMMAND: plt list
|
|
|
ERRORCODE: [06203] The image configuration is invalid
|