|
|
|
|
Display EDMA hardware interrupt information as follows:
|
|
| <Index> <Vector> <Handler> <Counter> <Time>
|
|
| The interrupt vector is a string that defines the source of the EDMA hardware interrupt.
|
|
| The application handler is one of the following:
|
|
|
|
|
| The interrupt counter is an activation counter for the EDMA hardware interrupt. The interrupt counter is a 32-bit value that will terminate at the maximum value.
|
|
| The interrupt time is the maximum time required by the EDMA hardware interrupt. Note that the maximum time may include delays imposed by higher priority hardware interrupts.
|
|
| This is intended as a development tool and should not be used during normal operation.
|
Thermal 1.0 / 1.7x equivalents:
|
|
|
- The monitor command rtos edma does not have an equivalent.
|
|
| Thermal 2 equivalents:
|
|
|
- The monitor command rtos edma does not have an equivalent.
|
COMMAND: rtos hwi
|