|
|
|
|
| index
| The index from 0 to 1.
|
Configure the maximum speed for the beam-blocker. A speed that is too low will cause the actuation to take too long and a speed that is too high will cause the stepper driver to stall.
|
|
| Note that the maximum speed for the beam-blocker may be exceeded since the maximum acceleration will be applied for at least one step. For example, a maximum speed of 0.000 steps/s will result in applying the maximum acceleration for one step.
|
Real
|
100 steps/s
|
0.000 to 238.404 steps/s
|
PARAMETER: act blockeracceleration <index>
|
|
|
PARAMETER: act blockerhold <index>
|