| Description | When the plot is complete and requested by the host, the exposure head will leave the write laser on between plots to extend the lifetime of the exposure head. However if the laser current is below the standby threshold, laser life is best extended by turning the laser off. | |
| Type | Float | |
| Default Value | 40.0 Amps | |
| Range | 0.0 to 90.0 Amps | |
| Related Documents |
COMMAND: sys laser [on|standby|off|anneal] | |
|
PARAMETER: sys laserstandby | ||
|
PARAMETER: sys standbyperiod | ||
|
PARAMETER: sys standbytimeout | ||