Minor Update 3.1.0.3 for Prinergy Release Installation Instructions 1. Copy all the Major and Minor Updates into one folder onto each server (example, into a Temp folder). 2. Shut down Prinergy. 3. On Primary server, launch PUpdate.exe and start the install. Follow the prompts. 4. Repeat for any secondary servers and renderstations. 5. Update each Workshop client, if necessary (not all minor updates are applicable to Workshop): On each client machine, start Workshop. At the Workshop login dialog box, enter the primary server name and click Login, if the Synchronize Workshop message box appears, click Yes to update Workshop. --------------------------------------------------------------------- This Prinergy update uses the following Adobe components: Printer JTP (RIP): CPSI 3017.102-04 CEPS Output JTP: CPSI 3015 Flattener: 3017.102-00 Normalizer: 7.0.5 PDF Library: 7.0.0 --------------------------------------------------------------------- This release now fully supports running the client on OS 10.4 (Tiger). Known Limitations: Integrated Preps won't work if the Workshop used is being run on the Prinergy Primary server unless AraxiPreps and Jobs volumes are mounted on Primary. --------------------------------------------------------------------- Additional Notes: --------------------------------------------------------------------- I) PRINERGY PROBLEMS FIXED BY THIS MINOR UPDATE: --------------------------------------------------------------------- 1. Wrong Last Final Output Date and Archive Date could appear in Job Finder. -If the job had never been output or archived, the date that would be displayed would be the one from the previous job. RSCR-0000146 2. JTPs on Secondaries would fail to start after IP address changed. This is now fixed. ANEN-0000158 3. Unhelpful message given for failure of Import of Edited Imposition with shared pageset. -If you edit an imposition that is linked to a shared pageset, and then attempt to "Keep the Existing Pageset and Imposition" on the return to Workshop, the Import should fail because a pageset cannot be modified if it's linked to another imposition. This process happens, but the message given in workshop does not describe the situation. The message has been updated. ANEN-0000156 4. Link now allows the MIS system to set the priority for initiated tasks. KBAI-0000031 5. "Hanging" job and main directory server processes. -The job and main directory servers would sometimes "hang" when attempting an "orderly shutdown" after encountering an error. The fix is to terminate immediately, bypassing the "orderly shutdown" procedure. RSCR-0000135 6. Screening crashes with asymmetric resolutions and Advanced HyperFlex -If you attempt to screen with asymmetric resolutions, i.e. where the x and y-resolutions are different with Advanced Hyperflex enabled, a crash occurred. This problem has now been fixed. GGEE-0000117 7. Destroying many jobs at a time would sometimes fail. -This problem has been fixed by destroying the jobs one at a time, instead of all at once. RSCR-0000129 8. SpoolServer dies when calling Job daemon to replace input files. -The problem was caused by a heavily loaded database not completing a query within the 2 minute timeout period. This fix adds an index to allow this operation to complete more quickly. RSCR-0000128 9. Layered PDF Versioning - White objects were missing when spot colors extracted in model 4 jobs. -This problem has been fixed. RMON-0000792 10. $[SeparationVersion] variable mark should replace with nothing in a non-LPV job. This has been fixed. RMON-0000780 11. Added a "_offset" parameter for variable marks that will allow each color of a color mark (such as $[color]) to not be printed on top of eachother. For example, use $[color_offset] to achieve this behaviour. RMON-0000779 12. Preflight was not able to detect operator "ri" (stroke rendering intent) inside the content stream of PDF file. this is now fixed. GCAS-0000367 13. For Layered PDF versioning, some pages were missing parts of the images after generation with the blend option set to true. -This problem has been fixed. RMON-0000761 14. Workshop Installer now works on Intel-processor Macs. ANEN-0000135 15. For Layered PDF Versioning, Generate was failing on a particular file when going through the Merge path. -This problem has been fixed. RMON-0000754 16. Implemented more truncation options for filenaming and variable marks. - = start at character x and use y characters to the right of it = start at character x and use y characters to the left of it <-x,y> = start x characters back from end and use y characters to the right of it <-x,-y> = start x characters back from end and use y characters to the left of it RMON-0000752 17. Added the ability to truncate variable marks from left to right with length specifier <-n>. For example, if the color is "Cyan" and you use $[color<-2>] you will get "an". This works for Custom Filenaming as well. RMON-0000745 18. ** Found during internal testing ** SEFR-0000167 19. ** Found in internal testing of 3.1.0.3 ** SEFR-0000166 20. Preflight was not able to correctly detect Page conformance to Press Layout and PDFX-1a and PDFX-3 layout. This is now fixed. SKOV-0000152 21. Remove some processes that were not necessary anymore. -Among others, the process BClusterServer.exe was not used anymore, although the process could cause errors by getting a port that was needed by other processes. MBOR-0000209 22. Preflight under certain circumstances was not able to detect Type3 fonts. This is now fixed. MKEG-0000187 23. found in internal testing DBES-0000137 24. Preflight failed to report Postscript XObjects in the PDF document. This is now fixed. MKEG-0000177 25. Added a registry key control to Fail instead of Warn if duplicate glyphs are detected during the refine process. -The registry key is called "ErrorOnDuplicateGlyph" and it is a DWORD that goes in the HKEY_LOCAL_MACHINE\SOFTWARE\Creo\Araxi\Settings\Default\ENOR\NormlizerOn. TFID-0000115 26. No longer append the suffix "_executed" to the imposition name from Smart Hot Folders. -Prinergy 3.1 started to add the suffix "_executed" to the imposition name from Smart Hot Folders. This suffix is no longer appended for backwards compatibility with previous Prinergy versions. AKUI-0000066 27. Prinergy imposition classification fails on .jobs generated by Prinergy itself -The classifier now scans for %SSiPrepsVer within the file. JKLN-0000179 28. Added a ICC device link profile which can perform RGB to Gray conversion based on PDF Specs v1.4 p.377 This ICC profile can be found in %ARAXIHOME%\CreoAraxi\data\ICC-Profiles\link\RGBToGraySimplePDF.icc SKOV-0000147 29. Added a ICC device link profile which can perform CMYK to Gray conversion based on PDF Specs v1.4 p.377 This ICC profile can be found in %ARAXIHOME%\CreoAraxi\data\ICC-Profiles\link\CMYKToGraySimplePDF.icc SKOV-0000146 30. TIFF-IT files would fail to be added as input. -If the file references in the FP file were invalid, the TIFF-IT file-set would not be added. This fix reverts to the behavior in Prinergy 3.0, which is to also look in the current directory for the other files composing the file-set. TFID-0000114 31. Using lots of RBA WaitPageApprovalChange actions can cause Prinergy restarts to fail -If you have hundreds of jobs with running rulesets in WaitPageApprovalChange, then on a restart RBA attempted to start hundreds of job daemons concurrently. The fix is to change the implementation so that starting a job daemon is unnecessary. BCON-0000298 32. PrinterJTP crash under output device load testing -Prinergy's queuing mechanism would cause a Printer JTP crash when managing a large number of tasks under heavy load. This fix increases the number of tasks that can be queued, increasing system stability. GHAN-0000123 33. Jobs missing processing icon and having no file processing info. -Some subpages in some jobs could lack VPS icons and processing info if a page-set was deleted. This problem has been fixed. RYAG-0000043 34. Failed to add process template groups longer than 30 bytes. -Process template group names with many Unicode characters could not be inserted into the database because the attribute size was too small. Increased the attribute size from 30 bytes to 90 bytes (i.e., 30 - 90 UTF-8 characters). SYOA-0000781 35. Preflight did not report that annotations (set to print) were removed. This is now fixed. MKEG-0000150 36. Normalizer 7 Defect: certain straight line bacame a curve after processing. This is now fixed. RFES-0000117 37. Registered file daemon crash in some circumstances. -The path length (server+share+path) used by one of the software components was too small, resulting in a memory overflow. This is now fixed. AKUI-0000063 38. Preflight was not reporting that black text was set to overprint. This is now fixed. MKEG-0000147 39. Found in internal testing. SEFR-0000160 40. Preflight was not able to detect that annotation is set to print. This is now fixed. SKOV-0000142 41. Pages fail to RIP with a "too complex" error. -In the 3017 RIP some limits for the numbers of objects in the PDF file have decreased. This fix removes trapping tags on output to decrease the number of tags and allow the page to be processed. MWER-0000116 42. PostScript from Quark 7's Print dialog would have incorrect TrimBox. -The fix was to add code to handle Quark 7 trim box PostScript (which differs slightly from quark 6). MKEG-0000144 43. If a PDF file is missing fonts you sometimes would get a "cos document table is full" error. This is now fixed. JMIO-0000129 44. CT/LW Output: Dimension of CT and LW were not the same when HC file is generated on TIFF/IT output. -This problem has been fixed. JRON-0000429 45. Preflight was not aware about annotation types introduced in PDF 1.4, 1.5, 1.6. This is now fixed. MKEG-0000142 46. found in internal testing SEFR-0000159 47. Preflight was not able to detect standard alternate images -Preflight can now detect standard (non-Kodak) alternate images and also able to detect if they set for printing SZMA-0000153 48. CIP3 output for 2 signatures at the same time has the wrong signature name in the jdf for signature 1. -This problem is fixed. GUNU-0000086 49. InSite could not delete a customer account. -This problem has been fixed. ACAS-0000356 50. ORIS handshake .R0P file cannot be classified for use with CEPS Conversion JTP. -Now it is fixed DMCA-0000183 51. Insite use of JTP rendering: Prinergy now uses Bicubic Resampling for Anti-Aliasing of Low Resolutions for PressProof Sharpening (only at <150 dpi) SEFR-0000157 52. Raster Color Management was only able to accept 6 colors space as source for device link profiles. This is now fixed. -Raster color management can accept any allowed N (N = 2...15) colors space as source space of the device link ICC profile KLEW-0000475 53. CT/LW Output: certain page is blank (white) when "Borders to LW" is selected. -This problem has been fixed. GCAS-0000370 54. CT/LW Output: Missing Text on certain files for TIFF/IT output. -This problem has been fixed. JRON-0000428 55. RBA Email attachment now accepts wildcards to attach a number of files -When sending an email with the Email action, you can now specify wildcards ("*" and "?") in a file name to send a number of files. For example, to send all the files in the HotFolders\Processed folder in a job, use "%triggerEvent.Job.HomePath%\HotFolders\Processed\*". KLEW-0000471 56. VPS 2.2.2 installer is included in this minor update. DMCA-0000182 57. Job failed to output when imaged at any defined VMR (variable mainscan resolution) -The Process Template Editor was not refusing an invalid combination of rendering resolution and VMR resolution. This problem has been fixed. As well the handshaking between the device interface and the Printer JTP has been modified to keep track of cancel FYEG-0000017 58. 7-to-4 Device Link profile not handled properly when using Raster CM. This is now fixed. KLEW-0000469 59. Added Printlink option to increase Preview resolution to 100 dpi. This has been added as a "Very High" resolution setting in PTED. JRON-0000421 60. CT/LW Output: Artifacts on some Black-only pages -This problem has been fixed. JRON-0000420 61. Fonts in a PDF file with a base name of 6 characters or less can cause Normalizer to fail. -This problem has been fixed. JRON-0000419 62. Contone images were inverted when doing Hyperflex Advanced for some specific types of input files. This has been fixed. SEFR-0000156 63. Preflight did not indicate that one of the base 14 fonts were not embedded in the pdf. -Preflight will now correctly report on this condition. Note that Normalizer will proceed to embed these fonts. SKOV-0000138 64. CT/LW Output: Overprinting Black text set to OPM 1 was knocking out. -This problem has been fixed. JRON-0000415 65. Preflight was not able to detect all possible JavaScript actions in the document -Preflight can identify all JavaScript actions present in the document SKOV-0000137 66. Preflight was not able to detect that modification and/or creation dates were set in PDF. This is now fixed. MKEG-0000120 67. Preflight report now indicates if the document has more than 1 page. MKEG-0000119 68. Preflight was not able to detect page orientation based on the page size. -Preflight is using width and height of the page in order to define page orientation and report about it. MKEG-0000117 69. Preflight did not use header information for identifying version. -Preflight is using information from the header of PDF file in order to identify version number MKEG-0000116 70. Preflight was not able to detect all possible actions in the document -Preflight can identify all actions present in a PDF document. SKOV-0000136 71. Color Matcher will fail if absolute rendering intent is used with device link (7 to CMYK) -This problem has been fixed. KLEW-0000460 72. Added a configurable Printlink option to change CIP3BeginBack and CIP3EndBack to CIP3BeginFront and CIP3EndFront. To use this option put the following line in your configurable Printlink file: AlwaysFront=true. JRON-0000414 73. Implement Prinergy support for changing curves in Color Supervisor calibration. SEFR-0000155 74. Files from MGS TIFF2PDF Tool were getting inverted by Copydot JTP -Files from this tool which use an unusual combination of DeviceCMYK colorspace and image (not imagemask) operator for Copydot data were getting inverted (black vs. white). This is now fixed. JBRF-0000979 75. Preflight logic has been updated to detect empty pages. DHUS-0000305 76. Cannot get export job information from Custom Database Reports. -This problem has been fixed. SYOA-0000758 77. Rather than trying to process a separated file with illegal DeviceN shading objects (which renders incorrectly), we now Fail it during the refine process. JRON-0000410 78. Color Editor behavior on 2nd Refine is different in 3.0.3.1 than in 3.0.3.0. -This fixed restored the functionality of being able to use the "Edit Copy..." option when performing a second refine with color mapping. KLEW-0000454 79. Editing a Workflow plan has the "Save" option grayed out after changes have been made. -This problem has been fixed. RFES-0000097 80. Future feature support ACHN-0000333 81. Marks file fails with "PDF Library Error: Incorrect PDEObject type" in the marks JTP. This has been fixed. JBRF-0000971 82. Preps integration: Fixed problem with multiple edit cycles for imposition with long names (longer than 28 chars) ABEA-0000100 83. Epson 9000 Imposed Proof: The “Maximum characters from job name” & other fields are disabled when they should be enabled. -This problem has been fixed. RFES-0000093 84. TIFF Input fails on 8-bit tiled files. -This problem has been fixed. JBRF-0000962 85. Separated vector output of a certain page had knockout artifacts when all process colors were set to "do not output". This has been fixed. KLEW-0000447 86. Marks file fails with "PDF Library Error: Incorrect PDEObject type" in the marks JTP. This has been fixed. MKEG-0000105 87. CT/LW Output: Blends are shifted on output for some files. This problem has been fixed. JRON-0000406 88. CT/LW Output: Dimension feature has a 1 pixel mismatch for some files. -This problem has been fixed. JRON-0000405 89. Increase maximum dot size for HyperFlex Advanced to 16 pixels. SZMA-0000145 90. HyperFlex Classic - increase maximum HyperFlex to 36 pixels. SZMA-0000144 91. A specific separated file drops a shading object in the 3016/3017 RIP. -This problem has been fixed. JBRF-0000957 92. CT/LW Output: Image corruption occurred on some files when output as TIFF-IT. -This problem has been fixed. JRON-0000403 93. Refiner: Error when normalizing MS Word file with additional comments in the file header. -Parsing now ignores the additional comment lines MKEG-0000099 94. Preflight was not able to detect that annotation is inside printable area -Preflight can detect and remove annotations which are inside printable area MKEG-0000097 95. Vector PDF output throws away the "Trapped" flag in PDFs. Now, the "Trapped" flag is copied over for loose-page output. JBRF-0000953 96. Assigning a black page to a surface, then assigning a CMYK one, results in a default print order of KCMY. -Added a new registry entry for JOBD:SeparationOrderList that determines the global separation ordering. If the registry value is present, separations will always be in the order that is specified by the registry value. E.g. if the value specifies 'Cyan,Magenta,Yellow,Black'. If the registry value is not present, the old behaviour will be retained. MALT-0000240 97. CT/LW Output: Font incorrect for some files on Tiff-it output. JRON-0000401 98. Japanese files not processed properly by Smart Hot Folder -This problem has been fixed. KLEW-0000439 99. The trapper would crash on certain files. This problem has been fixed. JMIO-0000088 100. Archiver JTP would disconnect when trying to search through protected sub-folders. -This problem has been fixed. ACHN-0000323 101. Marks file fails with "PDF Library Error: Incorrect PDEObject type" in the marks JTP. This problem has been fixed. JBRF-0000941 102. SMB connectivity: Archiver JTP crashed due to overrun buffer when archiving job with appledouble format. This is now fixed. ACHN-0000320 103. CT/LW Output: Added option to force CT to be the same dimension as LW. JRON-0000395 104. Process Template Editor (Mac specific): copy/paste of a Destination Profile path (for ColorMatcher) on Mac leads to a situation where incorrect path is returned. -This problem has been fixed. ABEA-0000084 105. Large number of active hotfolders cause MrxSmb errors in Windows. -Added a new registry entry "NumberOfHotfoldersPerPollingThread" which will now allow users to set the number of hotfolders per thread to a larger number. SYOA-0000740 106. Workshop would crash if signature view is selected first after job is opened. This is now fixed. LMCE-0010191 107. Color Proofing - a new feature has been added to allow separations to be colorized. This may be useful for simulating an overlay proof with an inkjet printer. When selecting vector output, in the Output Format dropdown, the options now are Automatic, Composite, Separated, and Separated Colorized. SZMA-0000133 108. Certain PDF pages would not output to TIFF-IT or CT/LW. There would be no error message. -This problem has been fixed. JRON-0000386 109. CT/LW Output: Images missing on output for specific files. -This problem has been fixed. JRON-0000381 110. Feature Request: Link requires Notfications from PrintLink for JDF preview generation. KBAI-0000028 111. CT/LW Output does not respect overprint mode OPM 0. -This problem has been fixed. JRON-0000380 112. Certain file would result in damaged PDF when processed with OPI. -Hi res OPI images from Photoshop were sometimes not previously handled properly and Acrobat would display an error "There was an error while trying to parse an image". This is now fixed. AENH-0000092 113. Problem found in internal testing. SZMA-0000129 114. DotShop Composer was not setting the dot shape attribute properly for IS screens. This problem has been fixed. SZMA-0000125 115. PTED: Printlink: Fixed file browsing/selection for Press Interface Config File setting. -When PrintLink/Use Custom File Naming was enabled user could not select "Press Interface Config File". Only directories could have been selected, which has now been fixed. OKLK-0000097 116. When outputting LQS TIFF of file with non-English characters, pointers in INI file don't match the files on disk. Since the INI file spec cannot be changed, we have converted filenames to ASCII, thus fixing this problem. JBRF-0000918 117. Rules-Based Automation: Rule cannot be saved when using 2-byte fonts as the rule name. -This problem has been fixed. KLEW-0000404 118. Some Workshops could not always connect to some Prinergy processes -At system startup, the name of the Server was not replaced with the IP address in the relevant registry values required by the server communications infrastructure. MBOR-0000186 119. Automation: fixed some problems when Wait Page Approval Changed action is restarted. ACAS-0000308 120. Possible deadlock in the job server process, causing Workshop to "hang". -This problem has been fixed. SYOA-0000723 121. New Feature: Optionally show Press Sheet and Plate Edge on imposed proofs. In the Marks section of output PT, there is a checkbox called "Show Press Sheet and Plate Edge". If you turn it on, you get a black line drawn where both boxes are. JBRF-0000904 122. Added support for reader spreads starting with page 1 on the left hand side of the first spread. MALT-0000223 123. CT/LW Output: TIFF/IT output for pages with less than four CMYK colors would result in a corrupted TIFF/IT file. This problem has been fixed. JBRF-0000883 124. Warn when spot color angles are overridden from Color Database. DMCA-0000146 125. Layered PDF Versioning - Do not require a re-generate if only file naming pattern changes. RMON-0000579 126. Workshop deployment: Process Templates don't show up in OS X Prinergy Workshop if there are unexepected user rights on /Library/Application Support/Creo. -This problem has been fixed. JBRF-0000853 127. New Feature: Signature Selection When you "Create New Imposition", you can now select "Use Prinergy Signature Selection", in addition to the previous "Use External Imposition Application" feature. This new feature lets you specify the run length, and based on binding style, the appropriate template. This feature eliminates the need to open Preps. For more information on this feature, see "Creating a Preps Imposition Plan" in online help. This feature is licensed as part Automated Imposition. SWAG-0000233 128. CT/LW Output: certain PDF page will not output to TIFF-IT when font GaramondBE is on the page. JRON-0000336 129. CT/LW Output does not respect OPM = 0, resulting in incorrect/lost traps. -This problem has been fixed. JBRF-0000820 130. PRegFileD.exe would crash in certain circumstances. This is now fixed. AKUI-0000062 131. New feature: JPEG compression for Raster PDF output When outputting an unscreened raster PDF, you can now specify JPEG compression with the various appropriate quality settings. 132. Veris and MatchPrint servers no longer automatically populated in PTED. With this release, the discovery mechanism (which automatically discovered Veris and MatchPrint servers and populated the list of servers in the device tab of the process Template editor) has been disabled due to various unresolveable issues. Veris and MatchPrint servers must now be added manually in the Prinergy Administrator before they will show up in the Process Template Editor. SHOR-0000173 %ARAXIHOME%\CreoAraxi\bin\PMainDirectoryD.exe (1,5,7,37) %ARAXIHOME%\CreoAraxi\bin\PYohoMessageServerD.exe (4,110) %ARAXIHOME%\CreoAraxi\bin\PYohoProxyServerD.exe (4,110) %ARAXIHOME%\CreoAraxi\bin\PJobD.exe (5,8,27,37,93,96,120,125) %ARAXIHOME%\AdobeExtreme\bin\PrinterJTP\PPrinterJTP.exe (6,52,130) Marks JTP (10,11,16,81,86,101) %araxihome%\AdobeExtreme\bin\PNormalizerJTP.exe (12,35,38,40,43,45,47,61,66,67,68,69,94) %araxihome%\AdobeExtreme\bin\POptimizerJTP.exe (12,35,38,40,45,47,66,67,68,69,94) %ARAXIHOME%\AdobeExtreme\bin\PGeneratorJTP.exe (13,15) Printer JTP (16,18,19,46,51,59,62,73,116,124) Vector JTP (16) Printlink JTP (16,72) %ARAXIHOME%\AdobeExtreme\bin\PMarkJTP.exe (17) %ARAXIHOME%\CreoAraxi\config_data\System\Araxi\ConfigP.txt (21) %ARAXIHOME%\CreoAraxi\bin\PJobTicketCreatorD.exe (27,93,110) %ARAXIHOME%\CreoAraxi\bin\PFileSummaryD.exe (27,93) %ARAXIHOME%\AdobeExtreme\bin\PImpExpJTP.exe (27,93) %ARAXIHOME%\CreoAraxi\data\ICC-Profiles\link\RGBToGraySimplePDF.icc (28) %ARAXIHOME%\CreoAraxi\data\ICC-Profiles\link\ReadmeDeviceLinkProfiles.txt (28,29) %ARAXIHOME%\CreoAraxi\data\ICC-Profiles\link\CMYKToGraySimplePDF.icc (29) %ARAXIHOME%\CreoAraxi\bin\XDLL.dll (32) %ARAXIHOME%\CreoAraxi\support\bin\XDLL.dll (32) %ARAXIHOME%\AdobeExtreme\bin\XDLL.dll (32) %ARAXIHOME%\AdobeExtreme\CTLWOutput\bin\XDLL.dll (32) %ARAXIHOME%\CreoAraxi\Setup\Config\SQL\UpgradeSchema\upgradeSchema124To125.sql (34) %ARAXIHOME%\CreoAraxi\bin\PTaskD.exe (37) %ARAXIHOME%\CreoAraxi\bin\PRegisteredFileD.exe (37) %ARAXIHOME%\CreoAraxi\setup\Config\Sql\Packages\DBCS_Paths.sql (37) %ARAXIHOME%\Creo (37) SCST.dll used by the Printer JTP (39) %ARAXIHOME%\AdobeExtreme\bin\Resource\IdiomSet\CreoAutoGeometry (42) %AraxiHome%\AdobeExtreme\bin\PPrinterJTP.exe (52) %ARAXIHOME%\AdobeExtreme\bin\PNormalizer.exe (65,70) %ARAXIHOME%\AdobeExtreme\bin\POptimzer.exe (65,70) %AraxiHome%\AdobeExtreme\bin\PColorMatcherJTP.exe (71) %ARAXIHOME%\AdobeExtreme\bin\CDotJTP.exe (74) %ARAXIHOME%\CreoAraxi\bin\UADM.exe (80) %ARAXIHOME%\CreoAraxi\support\bin\ForkTranslator.exe (80) %ARAXIHOME%\AdobeExtreme\bin\PVectorOutputJTP.exe (85,95) SCDV.dll (89) Dotshop Composer (89) %ARAXIHOME%\CreoAraxi\bin\TWFMManagerD.exe (98) %ARAXIHOME%\\CreoAraxi\setup\Config\Sql\UpgradeSchema\upgradeSchema124To124.1.sql (98) %ARAXIHOME%\AdobeExtreme\bin\PCTLWOutputJTP.exe (103) -----------------UNKNOWN PROBLEM------------------- (104,107,113,127) %ARAXIHOME%\CreoAraxi\bin\PHotFolderD.exe (105) PNormalizerJTP.exe (112) DotShopComposer.exe (114) %ARAXIHOME%\CreoAraxi\java\Workshop.jar (115) %ARAXIHOME%\CreoAraxi\java\ClientResources.jar (115) %ARAXIHOME%\CreoAraxi\config_data\System\Araxi\CreoAraxiconfigP.txt (118) %ARAXIHOME%\CreoAraxi\config_data\System\Araxi\configS.txt (118) %ARAXIHOME%\CreoAraxi\bin\checknetworkconfig.cmd (118) %ARAXIHOME%\CreoAraxi\bin\cleanup.cmd (118)