Description:

When in programming mode, this command uploads a file from the terminal device to HC memory.

fload head code

Loads the firmware into HC memory.

fload head phc

Loads an LCA file into HC memory for the HC board. This command is required by thermal head firmware version 1.19 and below.

fload head lvd

Loads an LCA file into HC memory for the LVD board. This command is required by thermal head firmware version 1.19 and below.

fload head bundle

Loads the bundle of LCA files into HC memory for the HC and LVD boards. The firmware determines the version of the HC and LVD boards and loads the appropriate LCA files from the bundle. This command is required by thermal head firmware version 1.20 and above.

Applies To:

• Thermal

Syntax:

Notes:

See Also:

• Command: fload
• Command: head boot
• Command: head end
• Command: head erase
• Command: head program
• Command: head test