Description:

When in programming mode, these command erase pre-allocated sections in the thermal head. Note that this function is automatically performed when uploading a file from the terminal device to HC memory.

head erase code

Erase the firmware from HC memory.

head erase phc

Erase the LCA file from HC memory for the HC board. This command is required by thermal head firmware version 1.19 and below.

head erase lvd

Erase the LCA file from HC memory for the LVD board. This command is required by thermal head firmware version 1.19 and below.

head erase bundle

Erase the bundle of LCA files from HC memory for the HC and LVD boards. This command is required by thermal head firmware version 1.20 and above.

Applies To:

• Thermal

Syntax:

Notes:

See Also:

• Command: head
• Command: head boot
• Command: head end
• Command: head program
• Command: head test
• Command: fload head