Error Message:

ALE: plate loaded incorrectly, remove plate from drum

Applies to:

• All

Service Information:

A plate flyoff or reset occurred. It must be removed from the machine before selecting 'Plate Removed'. If no fly-off plate is found in the machine, then the fly-off sensor may be misaligned or damaged. Use "set drum chkfly 0" to disable the fly-off sensor to get the customer going and arrange for field service.

Operator Action:

Open the machine's front panel and remove the plate which is partially loaded onto the drum. Select 'Plate Removed' to continue.

Cause:

• A flyoff or reset occurred while loading plate. It must be removed from the machine before selecting 'Plate Removed'.
• Damaged or mis-aligned fly-off sensor.
• Checked only before unload.

See Also:

• NVS: drum chkfly
• Other: Troubleshooting information