Error Message:

SCSI: SCSI driver error, invalid initiator

Applies to:

• All

Service Information:

This error indicates the SCSI driver encountered an "impossible" situation while communicating over the SCSI bus. This is likely due to a problem with the SCSI hardware (i.e. cables, workstation card, DPE, etc).

The SCSI hardware should be checked as outlined in the Service Manual Troubleshooting Guide. If the problem persists after all hardware causes have been ruled out, the firmware programmer responsible should be notified.

Operator Action:

Record error message and contact Creo service.

Cause:

• SCSI hardware (i.e. cables, workstation card, DPE, etc)

See Also: