Long Name:

Applies to:

Description:

This disables the sensors on the cylinder which lifts the plate up the unload from table from the drum, and then ejects it after the table is lowered (see no_table_sensor and

• nus = 0 enables checking of sensor.
• nus = 1 disables checking of sensor.

Type:

Default:

• 0

Range:

• 0 to 1

Notes:

When the sensors are disabled (nus=1) then the firmware defaults to delay of (unload_delay) milliseconds before it assumes the cylinder moved as directed. When enabled (nus=0) the same amount of time is allowed for the appropriate sensor to be detected before a timeout error is generated.

Partition:

See Also: