Long Name:

Applies to:

Description:

The load_vel parameter specifies the drum speed that is used while winding a plate onto the drum during a LOAD command.

This value MUST be positive.

Type:

Default:

• 100
• 20 (Trendsetter AL prior to V1.42)
• 60 (Trendsetter NEWS; Trendsetter AL as of V1.42)

Range:

• 0 to 100 [rpm]

Notes:

Note that plates manually loaded on Platesetters and manual Trendsetters, are actually loaded at about 1/10th this speed for safety reasons.

Partition:

See Also: