|
Specifies a sloping target profile for the beam balancing algorithm.
The bmslope parameter gives in a linear tilt to the beam. The HC board adjusts
the stroke values until the ON power varies linearly with the pixel number from
one end of the swath to the other.
The value of bmslope is the difference in ON power at the two edges of the
swath, expressed as a percentage of the maximum ON power. A positive value of
bmslope corresponds to the right side of the swath lower than the left.
Staccato is implemented using a wide and narrow mode for each media type. The
parameters bmcurve and bmslope are for wide mode while the parameters bmcurven
and bmslopen are for narrow mode.
|