Long Name:

Applies to:

Description:

Ignored when "laser ver" set to 0 (no laser). If laser ver = 1 or 2 (Adlas laser or adlas laser integration mode), the default value of tinit is 10. It may be set as high as 20.

If laser ver = 10 (Coherent laser), set tinit to 2. There is no feedback from the coherent laser to tell the firmware when the coherent laser is ready. Setting a 2 minute timeout gives the laser time to stabilize before the workstation is permitted to launch jobs.

Type:

Default:

• 10

Range:

• 0 to 254 [minutes]

Notes:

Partition:

See Also: