|
|
|
|
Firmware ( binary and Y-modem ) downloads using monitor redirection are not supported. The monitor commands fload bundle and fload bundle y are supported only by the diagnostic port of the exposure head.
|
|
| Typically the firmware download will need to be performed using the following sequence of monitor commands:
|
|
|
- The monitor command redirect disable will disable monitor redirection.
- The monitor command head program will enable programming mode on the host.
- The monitor command head boot will download the serial bootloader from the host to the exposure head.
- The monitor command fload head code will download the firmware bundle through the host to the exposure head.
|
Retry the firmware download using the diagnostic port of the exposure head or using an algorithm supported by the host.
|
- Firmware downloads using monitor redirection are not supported.
|
COMMAND: fload bundle
|
|
|
COMMAND: fload bundle y
|