|
|
|
|
| index
| Selects the sample index from 0 to 63.
|
The data logger subsystem will acquire sample data for further analysis. This NVS parameter configures the divisor for the sample points that will be stored during the acquisition of sample data.
|
|
| While this parameter can be used to configure the divisor for the sample points, it is recommended that the monitor command log sample [<point> (enable|disable)] [<divisor>] be used to configure the divisor for the sample points. The parameters are implemented for permanent storage only.
|
Integer
|
1
|
1 to 65535
|
COMMAND: log sample [<point> (enable|disable)] [<divisor>]
|