|
|
|
|
| media index
| Selects the media index from 0 to 15.
|
|
| diode
| Selects the diode from 0 to 63.
|
The media stroke is the desired power of the diodes while plotting that media.
|
|
| During a plot, there are two ways the diode currents are chosen:
|
|
|
- If media parameter "calibrate" is FALSE, the currents are set by looking up the media values in the power curves.
- If media parameter "calibrate" is TRUE, the currents (which are determined during a stroke calibration) are set from media parameter "currents".
|
|
| If this media requires stroke calibration, you must run "cal" after changing the stroke.
|
Integer
|
0 mW
|
0 to 65535 mW
|
COMMAND: cal
|
|
|
COMMAND: cal med <medIndex>
|
|
|
PARAMETER: med <media index> calibrate
|