|
|
|
|
Display the data logger subsystem information as follows:
|
|
| LOG: Control Mode=<Control Mode>
|
|
| LOG: Control Status=<Control Status>
|
|
| LOG: Transfer Counter=<Transfer Counter>
|
|
| LOG: Transfer Overruns=<Transfer Overruns>
|
|
| The data logger control mode is set by the monitor command log mode (sample|plot) (enable|disable). The data logger control mode will be one of the following:
|
|
|
|
|
| The data logger control status is determined by the data logger control mode and the current state of the data logger subsystem. The data logger control status will be one of the following:
|
|
|
- Sample
- Custom
- Plot
- Trigger
- Acquire
- Overrun
- Cancel
- Abort
- Terminate
- Off
|
|
| The transfer counter indicates the number of sample points that have been acquired and stored in the transfer buffer. If the data logger cannot process the transfer buffer in a timely fashion, the transfer buffer may overflow causing transfer overruns. The transfer overruns indicates the number of sample points that have been discarded and could not be stored in the transfer buffer.
|
Thermal 1.0 / 1.7x equivalents:
|
|
|
- The monitor command log info does not have an equivalent.
|
|
| Thermal 2 equivalents:
|
|
|
- The monitor command log info is equivalent to log info.
|
COMMAND: log mode (sample|plot) (enable|disable)
|