Trendsetter News Version Summary

Trendsetter News Firmware Release Summary

If you have any questions relating to the information on this page, contact Mike Bogelund.

Version	Status	Part # / ECO	Date	Notes
1.17		19-3327?-? /E706	May 17, 2002	Major features: Please see release notes.
1.16		19-3327A-C /E706	Mar 2002	Major features: Fix to reduce the occurrence of "trailing edge clamps not on actuator" error. The firmware now reads the TEC magnet sensor multiple times before reporting that the clamps are missing. Delay in turning on and off the whisker jet. For machines with toe-in pin configuration, plates larger than 750mm should now be centered in the bay (threshold used to be 800mm.
1.14		19-3327A-B /E278	Aug 2001	Major features: full support for plotting with 1200dpi head support for B1 format ability to ignore double edges during edge detect support for debris removal monitoring support for a processor interface
1.10 Build 4	Beta		May 2001	Ignores double edges if set temp b4 is set to 2. Update the plot percent complete every 1s instead of 10s. Fixed reporting so error while drum is stopping at end of plot will be reported properly.
1.0	Official Release	19-3327A-A /D650	Dec 2000	Fixes several drum problems: "timeout waiting for drum move" during unload "position error greater than 1000 ticks" during unload "drum is spinning" during unload "Drum position counter overrun, Index not detected" during imaging
1.0 Build 24	Pre-release		Nov 2000	Properly supports new carriage and drum drives. Some changes to increase throughput.