Formal release of what was 1.70 Patch 4

Patch 3 + Fully Fixed Fuji proof bug :(

Outdated, Please use 1.70 Patch 4 instead.
Patch 2 + Fixes artifact that will show up on plate after a Fuji proof.

Outdated, Please use 1.70 Patch 3 instead.
Patch 1 + Adjusts Offline Cleaning roller speed to avoid stalling.

Outdated, Please use 1.70 Patch 2 instead.
Release 1.70 + a patch for Staccato20 DuPont Spot Blue Imaging.

Uses Thermal head firmware version 1.83 or greater.

Main Features and Fixed Problems

New features:

• Very Small Plate Support  
• Support for Fuji Proofing Media  
• New Overwriting Patterns  
• EL Model Restrictions lifted  

Problems fixed:

• Artifact for large negative vsprot  
• Adjustable number of Extra strokes for clearing positive plates  
• RAM reworked to make space  

/F006

Uses Thermal head firmware version 1.80.

Main Features and Fixed Problems

New features (including 1.60 features):

• Media Console Support (unlimited media) 
• Manual mode proofing 
• 8UP proofing on TS400 
• Configurable carrier surface reflectivity
• Vacuum roller pre-clean
• UDRC support
• Whisker jet delay
• Small plate size on MCE drum
• Load plate sensor disable during carrier load.

Problems fixed (including 1.60 problems):

• Focus learn problem from 1.53 when using overwriting
• Positive plate un-imaged strip fix.

See the release notes for additional information.

/E872

This release has been removed due to a number of bugs that will be corrected for point release 1.61 in the near future.

Uses Thermal head firmware version 1.80.

New features:

• Media Console Support (unlimited media) 
• Manual mode proofing 
• 8UP proofing on TS400 
• Configurable carrier surface reflectivity
• Vacuum roller pre-clean

Problems fixed:

• Focus learn problem from 1.53 when using overwriting

See the release notes for details.

/E686

For EL devices running 1.50 or prior versions, unless specific imaging problem are observed, DO NOT upgrade to this version.

Problems fixed:

• Brisque SCSI reset hang.
• Focus learn near edge of plate causing 3 swath out of focus artifact.

/E528

For EL devices running 1.50 or prior versions, unless specific imaging problem are observed, DO NOT upgrade to this version.

Problems fixed:

• Spectrum EL causes timeout in DeCal tool scripts. 
• Excessive delay for Spectrum EL to produce test plots and series plots.

/E392

New features:

• Modified Spectrum EL imaging algorithm

/E238

Spectrum version 1.50 can ONLY be upgraded from version 1.40 or 1.41.

Note the change in Upgrade Procedure Step 4. See the release notes for details.

New features:

• Support for Staccato Proofing 
• Blank Skip 
• Consolidate Spectrum and Proofsetter code 
• Various bug fixes including false flyoff and drum problems

/E030

New features:

• Support for 8-up proofing format for Spectrum EL models.

Some sites may experience "unable to approve proofing jobs" in Print Console, please see release notes, section 4.1 for the solution.

If the customers are running any version prior to 1.40, upgrade to this version.

If the customers are already running 1.40 and they don't need 8-up for Spectrum EL, don't upgrade - wait for the 1.50 release.

/E016

New features:

• Support for EL, F, and V model machines.
• Non-hazardous debris removal support with monitoring.
• Miscellaneous minor bug fixes. See release notes.

Some site may experience "unable to approve proofing jobs" in Print Console, see the release notes, section 4.1 for the solution.

This is a point release of Spectrum code. See the Release Notes for details. This release is for new machines and upgrades from base Trendsetters only. All Spectrum machine upgrades should be using 1.21.

Features:

• System Pressure filtering Error light bugfix

/D566

This is the 4th production release of Spectrum code. This version works with head version 1.38. See the Release Notes for details. This release is for new machines and upgrades from base Trendsetters only. All Spectrum machine upgrades should be using 1.21.

Features:

• Removed 2up media format Introduced F and Fr speed spectrum models

/D371

This is the 3rd production release of Spectrum code. This version works with head version 1.38. See Spectrum 1.21 release for details. No Spectrum machine should be using previous versions.

Features:

• Support for large hole carrier (ECO D146) 
• More reliable drum vacuum assist.
• Faster throughput 
• Improved error recovery in terms of false media flyoff
• Solution to the yellow subscan image shift problem

/D272

/C952

This is the 2nd production release of Spectrum code. This version works with head version 1.38 and several mechanical ECO's which also must be implemented in order for this version to work reliably. See the Release Notes for details. No Spectrum machine should be using previous versions.

Features:

• Support for the 1.1 field sweep hardware 
• More reliable load/unload of proofing media 
• Faster throughput 
• Much better error recovery than previous versions

/C471

This is the first production release of Spectrum code. No Spectrum machine should be using previous versions.

Features:

• Base functionality 
• Much better error recovery than previous versions

Beta release of Spectrum code. No longer useful.