Long Name:

Applies to:

Description:

When set, (1), this flag enables the top and bottom load ramp out (AWAY from drum) sensors. These sensors are also used to verify that the load ramp actuators have successfully moved to the desired location and to ensure that the load ramp is not in the "no fly" zone before spinning the drum. When cleared, (0), the sensor is by-passed and timeouts are used instead.

Type:

Default:

• 1

Range:

• 0 to 1

Notes:

If this flag is cleared, (0), machine operation is significantly slowed down and some critical safety checks are not done. Clearing this flag should only be done on a temporary basis and the sensor should be repaired as soon as possible. Please do not clear this flag unless absolutely necessary!

Partition:

See Also: