Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Field Change Order

Dolev 4Press - FCO 21145- DC MOTOR DRIVER COMP. LEVEL L
Description

The existing DC motor driver causes overload failures

News Version: 32

Prepared By: A. Posner FCO Kit No.: 510F21145
Comp. Level: L Machine S/N: All
Catalog No. 503C36825S S/W Affected: N/A
Type of Change: Conditional Total Number of Pages:
Product Mgr: K. Paperny Approval Date: 06/13/95
Product Support: M. Bar Natan Approval Date: 06/13/95
Customer Support Mgr: S. Cohen Approval Date: 06/14/95
  1. REASON FOR CHANGE
    The existing DC motor driver (comp. level K) causes rejections of overload failures.
  2. DESCRIPTION OF CHANGE
    Replacing the DC motor driver board.
  3. CHANGE PROCEDURE
    1. Turn off the Imagesetter.
    2. Open the E-box
    3. Remove the DC motor driver
    4. Install the supplied DC motor driver (comp. level L)
    5. Close the E-box
    6. Turn on the Imagesetter
  4. TEST PROCEDURE
    Run a few loadings, cut and collect. Verify good operation.
  5. PARTS LIST
    503C36825S DC MOTOR DRIVER x1
  6. ATTACHED DOCUMENTATION
    None
  7. MATERIAL DISPOSITION
    The old board should be sent back to STIL
  8. LOGISTICS
    Material for performing this FCO will be supplied one month after orders
    are placed.
    STE can order up to 9 units
    STA can order up to 3 units
    STMA can order 1 unit

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.