Dolev 4Press; Dolev 4Press V; Dolev 4news - FCO 24548- New Vacuum Tunnel

Field Change Order

Dolev 4Press; Dolev 4Press V; Dolev 4news - FCO 24548- New Vacuum Tunnel

Description

New vacuum tunnel that will improve the cut out removal will replace the old type.

Prepared By: A. Posner	FCO Kit No.: 510F24548
Comp. Level: N/A	Machine S/N: N/A
Catalog No. 510F24548	S/W Affected: N/A
Type of Change: Conditional	Total Number of Pages:2
Product Mgr: G. Menchik	Approval Date:
Product Support: A. Posner	Approval Date:
Customer Support Mgr: K. Paperny	Approval Date:

Reason For Change
The old tunnel will not be held properly on the drum and the film cut outs will not go to the punch remainders.
Description of Change
The old tunnel will be replaced with the new type and the side punches will be rinstall by using the new parts.
Change Procedure
1. Mark the position of all the side punches.
2. Remove the punches.
3. Remove the old vacuum tunnel ( Transparnt Tunnel )
4. Install the supplied tunnel with the new punch remainder adaptor.
5. Reinstall the side punches.
6. Install all the parts to complete the hardware installation.
Test Procedure
1. Make sure that the punch alignment will be the same as before.
Parts List
290B7L469 X1
374A2G741 X1
280B40121 X1
380V07050 X4
290B7L470 X1
380A05101 X2
380A03041 X1
382D11000 X3
382A11000 X2
291B2G624 X1
291B2G623 X1
433H7L803 X 70Cm.
344F70060 X 10Cm.
Attached Documentation
None
Material Disposition
The old tunnels can be disposed.
Logistics
Material will be supplied according to orders from the DU's.