Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Author/Submitter: A. Posner (10/13/96)
Document Released: 10/13/96
Product Family: Imagesetters / Platesetters
On some of the new Dolev 4press we found wrong wiring connection inside the P-Box that will create problems to set the 110V.
Checking the problem:
The problem exists if there is a short between pins 5 and 7 on connector J5
(Shown as J2 on the drawing ).
Corrective Action:
Switch between the wires # 7 and # 9 coming out from J5 ( Shown as J2 on the
drawing ) connector.
Switch between them on the transformer side!